> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.eyesurf.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How do I setup my phone with the Linksys PAP2T?

**How do I setup my phone with the Linksys PAP2T?**

Setting up the Linksys PAP2T can be done in by following the steps below:

1. Connect your phone to the green Phone 1 port of the PAP2T using a phone cable.

2. Connect your modem/router to the blue Internet port of the PAP2T using a LAN/Ethernet cable.

3. Plug in the PAP2T to the power using the provided AC adapter.

4. When Power, Ethernet, and Phone 1 lights on the PAP2T are on, your phone is now ready to use.

![](https://storage.crisp.chat/users/helpdesk/website/72ab0a4aec6ccc00/7bf9fe75-bef3-4ecc-b0b2-b4352a_xpu9xo.png)

If you are using a modem that has both LAN/Ethernet and WAN/Internet ports, the PAP2T should be connected to the LAN/Ethernet port of the modem and not the WAN/Internet port.

![](https://storage.crisp.chat/users/helpdesk/website/b46d9bc27c604800/b65d8b4b-0df7-451f-a109-fb4c45_10uurtf.png)